GROVE

Grove GRT8100-1

A 100-tonne-class rough-terrain crane for structural, industrial, infrastructure and energy-sector lifting on prepared jobsites.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
Grove GRT8100-1 rough-terrain crane
Grove GRT8100-1
At a glance

Key specifications

Maximum rated capacity
100 t at 2.0 m radius
Applicable chart; not universal capacity
Telescopic main boom
12–47 m
Five-section full-power boom
Swingaway extension
10–17 m
Manual or hydraulic offset versions
Maximum tip height
72.9 m
Requires 17.1 m extension and 6.1 m insert
Engine output
224 kW
Cummins B6.7L at 2,500 rpm
Maximum drive speed
24.1 km/h
With standard 9,979 kg counterweight
Equipment profile

Built around the project configuration

The Grove GRT8100-1 is a 100-tonne-class rough-terrain crane for structural, industrial, infrastructure and energy-sector lifting on prepared jobsites. Its five-section 12–47 m telescopic boom combines road-independent site mobility with a compact two-axle carrier and four selectable steering modes.

MAXbase outrigger positioning supports constrained setups through programmed symmetric and asymmetric positions. Optional bi-fold swingaways and a lattice insert extend the crane's lifting geometry, while Grove's control system monitors the selected configuration, radius and permitted load throughout the lift.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Boom and lifting system

Maximum rated capacity 100 t at 2.0 m radius
Telescopic main boom 12–47 m, five sections
Boom elevation -3° to +80°
Bi-fold swingaway 10–17 m, manual or hydraulic
Swingaway offset 0–40°, depending on version
Optional lattice insert 6.1 m
Maximum main-boom tip height Approximately 50 m
Maximum tip height with extension package 72.9 m

Hoists and controls

Maximum permissible single-line pull 7,784 kg
Maximum no-load single-line speed 131 m/min
Main and auxiliary rope length 214 m each
Crane control Grove Crane Control System
Load protection Rated Capacity Limiter with anti-two-block protection
Maximum swing speed 2 rpm
Diagnostics On-Crane Service Interface

Carrier and outriggers

Drive and steer Two driven and steered axles
Steering modes Front, rear, coordinated and crab
Tyres 29.5 × 25, 34-ply rating
Standard outrigger settings 0%, 50% and fully extended
Variable outriggers MAXbase programmed asymmetric-position capability
Maximum drive speed 24.1 km/h with standard counterweight
Transmission Rangeshift with six forward and six reverse speeds

Power and operating package

Engine Cummins B6.7L six-cylinder turbo-diesel
Rated output 224 kW at 2,500 rpm
Maximum torque 1,288 Nm at 1,500 rpm
Emissions packages Stage V / Tier 4 Final and Tier 3
Fuel capacity 271 L
Standard counterweight 9,979 kg
Optional counterweight total 12,247 kg
Headline gross vehicle weight 56,945 kg, configuration dependent
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support