PUTZMEISTER

Putzmeister M36-4

A four-section Z-fold truck-mounted concrete pump for building and civil concrete placement.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
Putzmeister M36-4 truck-mounted concrete boom pump
Putzmeister M36-4
At a glance

Key specifications

Vertical reach
35.6 m
Four-section placing boom
Net horizontal reach
28.5 m
Gross horizontal reach is 31.4 m
Maximum downward reach
23.1 m
Published boom geometry
Unfolding height
8.5 m
Z-fold boom
Maximum theoretical output
160 m³/h
Reviewed 16 H rod-side mode
Boom delivery line
DN 125 / 85 bar
Maximum boom-line pressure
Equipment profile

Built around the project configuration

The Putzmeister M36-4 is a truck-mounted concrete pump built around a four-section Z-fold placing boom. Its 35.6 m vertical reach, 28.5 m net horizontal reach and 8.5 m unfolding height support floor, wall, foundation and civil pours where a mid-size boom must work around buildings and restricted setup areas.

The reviewed European configuration offers different core pumps. With the 16 H unit, maximum theoretical output is 160 m³/h in rod-side mode, while piston-side operation provides up to 130 bar at a lower output. These maxima are not simultaneous, and the DN 125 boom delivery line remains limited to 85 bar.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Boom and reach

Boom sections 4
Folding system Z-fold
Vertical reach 35.6 m
Gross/net horizontal reach 31.4 / 28.5 m
Maximum downward reach 23.1 m
Unfolding height 8.5 m
End hose 4 m
Slewing range 365 degrees
Delivery line DN 125, maximum 85 bar

Reviewed 16 H pump

Rod-side output/pressure 160 m³/h / 85 bar maximum theoretical
Piston-side output/pressure 108 m³/h / 130 bar maximum theoretical
Rod-/piston-side stroke rate 31 / 21 per minute
Delivery cylinders 230 × 2,100 mm
Operating qualification Maximum output and maximum pressure are not simultaneous
Boom-line qualification DN 125 boom delivery line remains limited to 85 bar

Support and systems

Full support width front/rear 5.50 / 7.00 m to support-leg centres
Restricted setup Flexible support available depending on configuration
Control system Ergonic 3 in the reviewed scope
Remote control Radio remote control with display
Output control EOC 2.0
Reference water tank 700 L
Reference water pump 160 L/min at 25 bar
Chassis Dimensions and total mass are configuration dependent
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support