CIFA

CIFA MK32L

A combined 9 m³ truck mixer, concrete pump and four-section Steeltech placing boom.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
At a glance

Key specifications

Mixer nominal capacity
9 m³
MK32L 115 drum configuration
Vertical reach
31.2 m
Four-section Steeltech boom
Maximum horizontal distance
27.2 m
Published boom geometry
PB607 pump mode
61 m³/h at 71 bar
Maximum theoretical values
PB808 pump mode
81 m³/h at 81 bar
Maximum theoretical values
Pipeline diameter
100 mm
Placing-boom pipeline
Equipment profile

Built around the project configuration

The CIFA MK32L combines a 9 m³ mixer drum, concrete pump and four-section placing boom on one truck. It is designed for ready-mix delivery and placement work where using one vehicle can reduce site traffic and simplify coordination between concrete transport and pumping.

Its Steeltech boom reaches 31.2 m vertically and 27.2 m horizontally. The reviewed MK32L can use a PB607 pumping unit rated up to 61 m³/h at 71 bar or a PB808 rated up to 81 m³/h at 81 bar, allowing the pumping package to be matched to the intended workload.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Mixer and boom

Mixer nominal capacity 9 m³
Geometric drum volume 14.5 m³
Published filling ratio 69 percent
Maximum drum speed 14 rpm
Water tank 800 L
Boom sections 4
Vertical reach 31.2 m
Maximum horizontal distance 27.2 m
Delivery pipeline 100 mm

Pumping-unit choices

PB607 S7 output/pressure 61 m³/h / 71 bar maximum theoretical
PB808 S7 output/pressure 81 m³/h / 81 bar maximum theoretical
PB607/PB808 maximum cycle rate 32 / 43 per minute
Delivery cylinders 200 × 1,000 mm
PB607/PB808 hopper capacity 400 / 500 L
Transfer valve S7
Pumping system Open loop
Performance qualification Actual output depends on concrete and pipeline conditions

Chassis and site planning

Carrier Four-axle truck chassis
Chassis Brand and engine configuration dependent
Road configuration Payload, road mass and axle distribution require selected build
Working envelope Support layout and unfolding clearance require applicable working diagram
Site services Water, washout, pipeline and accessories selected for project
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support