SOILMEC

SOILMEC SM-15 HD

A heavy-duty micropiling rig for anchor drilling, named single- and double-head packages, front-of-wall work, and configured jet grouting.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
SOILMEC SM-15 HD micropiling drill rig
SOILMEC SM-15 HD
At a glance

Key specifications

Rated power
186 kW
Cummins B6.7, Stage V / Tier 4 Final
Published rig weight
19 t
Final configuration affects weight
Feed / hoist force
Up to 121 kN
Modular motoreducer mast
Feed stroke
4.0–7.0 m
Four mast configurations
Clamp range
50–315 or 60–415 mm
Principal clamp packages
Jet-grouting single pass
20 m
Telescopic 7 m mast arrangement
Equipment profile

Built around the project configuration

The SOILMEC SM-15 HD is a heavy-duty micropiling rig for anchor drilling, rod-and-casing double-head work, and configured jet-grouting applications. Four mast strokes and three kinematic systems allow the machine to be arranged around drilling reach, starting position, method, and handling requirements.

The model supports multiple single-head and double-head packages rather than one fixed rotary specification. A front-of-wall joint can position the mast beside the crawler tracks, while the dedicated jet-grouting arrangement extends treatment depth to 20 m in one pass.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Power and hydraulics

Stage V / Tier 4 Final engine Cummins B6.7, 186 kW at 2,000 rpm
Stage III / Tier 3 engine Cummins B6.7, 179 kW at 2,000 rpm
Main hydraulic pumps 214 + 214 L/min
Hydraulic-oil capacity 510 L
Fuel capacity 330 L
Hydraulic system Load sensing

Mast and feed

Available strokes 4,000 / 4,300 / 5,300 / 7,000 mm
4,000 mm cylinder-crowd mast 89 kN hoist / 45 kN feed
Modular motoreducer masts 121 kN hoist / 121 kN feed
Kinematic systems Cylinder-and-pin, ±180° slew ring, or front-of-wall joint

Rotary and double-head systems

Single-head choices 11.4–33.9 kNm depending on exact rotary head
Double-head option 1 HT1700 upper: 19.53 kNm / HT3400 lower: 33.48 kNm
Double-head option 2 RH10X upper: 11.0 kNm / RH32X lower: 32.0 kNm
Double-head feed stroke 5,300 mm
Double-head feed / hoist 121 / 121 kN

Jet-grouting configuration

Maximum single-pass treatment depth 20 m
Mast arrangement 7,000 mm stroke with 11.8 + 2.2 m telescopic extensions
Hydraulic-chuck handling diameter 114 mm
Rotary head HT3700, 33.9 kNm at up to 122 rpm
Published operating weight 21.1 t without rods and casing
Transport envelope 11,800 × 2,500 mm; height 2,500–3,270 mm by guard arrangement

Carrier, clamps, and handling

Track-shoe width 400 mm
Overall crawler width 2,500 mm standard / 2,300 mm special transport arrangement
Travel speed 1.6 km/h
Principal clamp packages 50–315 mm or 60–415 mm
Expanded clamp option 45–415 mm or 180–520 mm using two jaw sets
Maximum clamping force 266 kN
Rod carousels 3, 5, or 10 rods depending on rod diameter

Controls and safety

Operating controls Hydraulic proportional controls; optional full radio remote control
Operating modes ROM and SPM
Guarding Hydraulic guard, emergency stops, and trip-wire devices
Data systems DMS On Board and DMS Manager 4.0 connectivity
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support