KLEMM

KLEMM KR 806-3GS

A universal anchor drilling rig for double-head overburden work, low or inclined drilling positions, excavation support, and foundation tiebacks.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
KLEMM KR 806-3GS anchor drilling rig
KLEMM KR 806-3GS
At a glance

Key specifications

Rated power
175 kW
Stage V / Tier 4 Final diesel configuration
Operating weight
19.5 t
Published rig value; final configuration affects weight
Main hydraulic flow
2 × 240 L/min
Load-sensing circuits
System pressure
350 bar
Maximum
Tractive force
188 kN
Maximum
Feed / retraction force
Up to 130 / 65 kN
202/13 mast, two operating ranges
Equipment profile

Built around the project configuration

The KLEMM KR 806-3GS is a universal anchor drilling rig built around demanding overburden work and double-head drilling systems. Its articulated mast positioning supports low, inclined, and laterally offset drilling locations, making the machine relevant to excavation support, uplift anchors, and foundation tieback work where setup geometry matters as much as drilling power.

Multiple mast and drill-head arrangements let the rig be configured for rotary, rotary-percussive, or double-head methods. The selected mast, head, rod-handling equipment, and flushing package determine the final working capability, transport profile, and machine weight.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Mast and feed

Mast choices 202/10, 202/13, or 303/10 HPI
Frame length 7,300 mm with 202 masts / 7,600 mm with 303/10 HPI
Feed / retraction force 100 / 50 kN or 130 / 65 kN, depending on mast
Feed / retraction rate 5 / 11 m/min or 5 / 9 m/min, depending on mast
Fast feed / retraction Up to 33 / 65 m/min, depending on mast
Optional HPI single pass 18,200 mm with the documented lattice-mast configuration

Drill system

Largest documented rotary head KLEMM KH 39
Largest documented hydraulic drifter KLEMM KD 3428
Double-head options KH 39 / KD 1215R (HP) or KH 39 / KH 21
Carriage Laterally sliding carriage for configured single- or double-head systems

Power and hydraulics

Engine Volvo Penta TAD 583VE
Rated output 175 kW
Emissions EU Stage V / EPA Tier 4 Final
Main hydraulic circuits 2 × 240 L/min load-sensing
Maximum system pressure 350 bar
Fuel capacity 400 L
Hydraulic capacity 550 L

Carrier and site fit

Undercarriage B2 oscillating crawler
Overall width 2,500 mm standard / 2,600 mm with optional 500 mm shoes
Ground clearance 390 mm
Oscillation range +14° / -6°
Maximum tractive force 188 kN
Published rig weight 19.5 t
Drilling positions Low, inclined, and beside-track positions supported by the rig kinematics

Controls and options

Primary operation Radio control for tramming, setup, and drilling
Machine display LCD color display with touch input
Rod handling Optional MAG 2.1 V double-rod loader and other handling systems
Flushing equipment Optional monitored equipment for as many as three media; air lubrication up to 35 bar
Safety provisions ROM and SPM modes; optional EN 16228 interlocking guard
Data systems Optional MBS 5 drill-data recording and telematics
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support