EPIROC

EPIROC FlexiROC T35

A cab-equipped tracked top-hammer rig for 64–115 mm quarry and civil-construction surface drilling.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
EPIROC FlexiROC T35 cab-equipped tracked surface top-hammer drill rig
EPIROC FlexiROC T35
At a glance

Key specifications

Hole-diameter range
64–115 mm
Recommended overall range
Rock-drill output
19 or 25 kW
Depends on selected COP rock drill
General maximum depth
28 m
Current exact-model page
Engine output
168 kW
CAT C7.1 Stage V / Tier 4 Final configuration
Compressor capacity
127 l/s
Free-air delivery at normal working pressure
Published weight
Approximately 15,350 kg
Current exact-model page
Equipment profile

Built around the project configuration

The EPIROC FlexiROC T35 is a tracked top-hammer rig for quarry benches and demanding civil-construction drilling. Its enclosed ROPS/FOPS cabin, folding boom and hydraulically oscillating carrier provide a protected, stable working platform for 64–115 mm holes.

Operators can match the rig to different rock and hole requirements through a choice of COP rock drills and T38, T45 or T51 tooling. A cylinder-operated feed, carousel rod handler, onboard flushing air and integrated dust collection support repeated multi-rod drilling across varied surface conditions.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Rock drill and tooling

Drilling method Top hammer
Recommended overall hole range 64–115 mm
Tool systems T38, T45 and T51
COP SC19 configuration 19 kW; 64–115 mm published range
COP SC25-HF configuration 25 kW; 64–89 mm published range
Additional current choice COP SC25-HE

Feed and rod handling

Feed system Hydraulic cylinder feed with aluminium feed beam
Feed extension 1,400 mm
Maximum feed rate 0.92 m/s
Maximum feed and pullback force 20 kN
Rod handler Carousel arrangement, 1+7 rods in current brochure
General maximum depth 28 m
3.6 m extension-rod arrangement Up to 30.4 m with stated 5.5 m starter rod
4.3 m extension-rod arrangement Up to 34 m with stated 5.5 m starter rod

Power, air and dust control

Engine CAT C7.1 turbocharged diesel
Stage V / Tier 4 Final output 168 kW at 2,200 rpm
Regional engine packages Stage V / Tier 4 Final, Tier 3 / Stage IIIA or China IV
Compressor free-air delivery 127 l/s
Maximum compressor pressure 10.5 bar
Dust collector DCT 110 with pre-separator
Fuel-tank capacity 370 L

Carrier, cabin and transport

Carrier Tracked, with hydraulic oscillation and two-speed traction
Boom Folding boom with hydraulic tramming support leg
Operator environment Enclosed ROPS/FOPS-approved cabin
Current-page transport dimensions 11,970 × 2,490 × 3,500 mm
Published weight 15,350 kg
Transport qualification Dimensions and weight vary with feed position, engine and options
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support